Cloud canopy

Product Description

A piece of sky for the children's room

Additional Notes

The recess for the canopy has dimensions: Ø110 and a height of 25mm The cloud cover itself measures approximately: 180x110x31mm and can be screwed on from the outside with two 3x12mm (or larger) screws. Alternatively, an M3 hex nut can be glued into the cloud holder and the cloud canopy screwed on with M3 screws. The hot air balloons (120%, 100%, 75% models) that are attached to my cloud can be found here: You need 1x lamp canopy right and 1x lamp canopy left, plus 2x cloud holders. For a bit more style, I have also added the fuzzy models :) Assembly Instructions: 1- First, stick double-sided adhesive tape on the back of the holder. 2- In the next step, fix the holder to the canopy with two screws. (Note: Only lightly, so it is held in position! 3- Press the entire assembly firmly against the ceiling! 4- Loosen the screws and hope that the holder is glued firmly. I also needed several attempts on the second one! I'm already thinking about how to solve it better. 5- Mark and drill the drilling position through the elongated holes and fix with screws. I used 4x30mm pan head screws. Plate 1 - Cloud canopy right 2.4 h 61 g 0.4 mm PLA｜ 61 g Plate 2 - Cloud canopy right fuzzy mode 2.7 h 61 g 0.4 mm PLA｜ 61 g Plate 3 - cloud bracket M3 22 min 5 g 0.4 mm PLA｜ 5 g Plate 4 - Cloud canopy left 2.4 h 61 g 0.4 mm PLA｜ 61 g Plate 5 - cloud canopy left fuzzy mode 2.7 h 61 g 0.4 mm PLA｜ 61 g